Call Trace Filter Parameters

Filter parameter

When using the Call trace API to select a subset of calls, these are the parameter that can be used in the query.

Parameter	Format	Description
uct_call_id	Hexadecimal	Will return the call matching this ID.
direction	Integer	Incoming (1), outgoing (2), Mixer(3), Media only (4) .
max	Integer	Max number of call that will be matched by the filter.
called	String	Called number. Will match partial substrings of phone numbers.
calling	String	Calling number. Will match partial substrings of phone numbers.
nap	String	Nap used by the call.
protocol	String	Protocol used by the call (SS7, SIP, ISDN, CAS).
route	String	Name of the route used by the call.
call_id	String	SIP Call-Id header. Available for SIP call leg.
mos	String	MOS value from 1.0 to 5.0. Available for SIP call leg.
network_quality	Integer	Percentage from 1 to 100. Available for SIP call leg.
recorded	String	String can either be "RECORDED" or "NOTRECORDED".
call_state	String	"ACTIVE" or "INACTIVE"
terminate_reason	String or Integer	"NORMAL", "NOT_NORMAL" or the cause Integer value.
call_duration	Integer	All calls with a duration (in seconds) under the value of "call_duration". When the value prefixed by a '>', it will return all calls greater than the value. A range can be obtained by inputing 2 values in the format 'x-y', where x is the minimum duration and y is the maximum.
intercepted	Boolean	True or false: Match all legs that are intercepted (if true) or all that are not (if false).
interception_leg	Boolean	Match all legs that are Interception legs
interception_liid	String	Match all legs that match the interception LIID
start	Integer or String	Unix timestamp (in milliseconds) for the beginning of the call. Match calls with a greater timestamp value. An external website can be used for converting the time into a timestamp. Can also use a string in the following format: 'YYYY-mm-dd HH:MM:SS'. Note that the timezone used will be the one on the queried system.
end	Integer or String	Unix timestamp (in milliseconds) for the end of the call. Match calls with a lesser timestamp value. An external website can be used for converting the time into a timestamp. Can also use a string in the following format: 'YYYY-mm-dd HH:MM:SS'. Note that the timezone used will be the one on the queried system.
drop_call	Boolean	Flag used to signify that all calls matching the filter parameters will be terminated. Use with caution when dropping multiple calls at once.