SIP Trunk Configuration Instruction with Cisco UCM
Introduction
SIP Trunk Configuration Instruction with Cisco Unified Communications Manager Example Configuration provides you with a step-by-step SIP Trunk Configuration of ProSBC with Cisco UCM 12 systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. Please check how to configure the SIP Trunk in Cisco UCM for ProSBC from Adding ProSBC as a SIP Trunk in Cisco UCM
Cisco UCM SIP Trunk Example

Configuration Steps
(Step 1) Create IP Network
(Step 2) Create Protocol Stack
(Step 3) Create Call Route
NAP Configuration
See Create SIP NAP
Here, You must create two NAPs, one SIP NAP will be FreePBX NAP and other NAP will be for SIP trunk provided by ITSP
PreviousSIP Trunk Configuration Instruction with Yeastar P-Series CloudNextSIP Trunk Configuration Instruction with VoIP.ms SIP trunking
Last updated
Was this helpful?