FreePBX
Introduction
This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for FreePBX server.
NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.
Prerequisites
ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
FreePBX.For additional information on FreePBX, visit FreePBX offical web site.
Example Environments for SIP Trunking with FreePBX

Example Configuration
Step by step example SIP Trunk configuration.
Example Environments for Remote Workers with FreePBX

Example Configuration
Step by step example Remote workers configuration.
Troubleshooting
Call Trace
Test Call
TBReport
Advanced Troubleshooting of ProSBC
Last updated
Was this helpful?