Cisco UCM 12

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking with Cisco Unified Telecommunications Manager 12.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.

• Cisco Unified Communications Manager 12. For additional information on Cisco UCM, visit Cisco Support.

Example Environments for SIP Trunking with Cisco UCM

Example Configuration

Step by step example SIP Trunk configuration.

• Adding ProSBC as a SIP Trunk in Cisco UCM

• SIP Trunk Configuration Instruction with Cisco UCM

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC